EagleEye Quick Start 1. Introduction The EagleEye is a powerful GPS Tracker designed for vehicle and asset tracking. With superior receive sensitivity, fast TTFF (Time to First Fix) and Quad-band GSM frequencies 850/900/1800/1900 its location can be accurately monitored. Based on the embedded...
2.2. Buttons/Mini USB Interface Description Button/Mini USB Interface Description Power Key (Enabled by Default) Turn on EagleEye *can be disabled Turn off EagleEye when without charge (if power key is enabled). Function Key Send Immediate GPS report Mini USB Interface...
EagleEye Quick Start 3. Device Activation Step 1. Go to uspy.datablaze.com/activate Step 2. Enter Activation Key (located on outside of box). Step 3. Follow instructions on the screen Step 4. Device will be active and ready for use within minutes.
During charging, the PWR LED is flashing fast. When the battery is fully charged, the PWR LED will be solid. You can also charge the battery by USB cable which connects the EagleEye with the PC. Charging time is about 5 hours.
Do not put the device on overheating or too humid place, and avoid exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion. Do not use the EagleEye Tracker on the airplane or near medical equipment. P a g e...
To install the EagleEye Tracker into the optional holder use the following process. 7.2. External GPS Antenna Specification There is a MMCX RF connector on the EagleEye and it is for an external GPS antenna. This will screw into the EagleEye tracker next to the mini USB insert.
Need help?
Do you have a question about the EagleEye and is the answer not in the manual?
Questions and answers