Starting Your Wash - Dyson Contrarotator User Manual

Starting your wash

To start your wash cycle using the default settings
1
Mains on/off
Press to turn power on before
selecting a programme.
2
Select your programme
Press to select your programme
option. Default settings will be set
for temperature, spin and dirt
level which are safe for that
fabric type.
7 01
End of your wash cycle
At the end of the wash programme the display will indicate
'Programme finished'. Remove the washing and turn off the machine
by pressing the 'Mains on/off' button. Switch off the electricity at the
socket and turn off the water supply to the machine.
3
Start your wash cycle
Press to start your chosen wash
programme. If at any time you
wish to pause the cycle, press
the 'start' button a second
time. When paused, the display
indicates that the programme
may be restarted by pressing
the 'start' button.
When a programme is paused,
the door may be locked for
safety reasons, see section
8 01 Door lock.
4
Cancel your wash cycle
Press and hold down to cancel
a programme at any time.
The machine will stop and
drain all the water and the
doors will then be unlocked if it
is safe to do so.
If, for example, the wash is too
hot after a 85°C cycle, the
doors will stay locked until the
temperature is safe to allow the
doors to be opened.