Universal Remote Control Total Control TKP-7000 Owner's Manual page 29

Network
This option will show important information about the current
network, its settings and give the ability to edit the IP address of the
TKP-7000.
Be careful, these settings should only be edited by a professional.
Entering values without specific information or instruction could
easily result in the TKP-7000 failing to function correctly.
The Network Information screen will display the status of the
network connection (connected, not connected) as well as the
current address type (DHCP or Static), IP address and Subnet Mask.
Selecting the EDIT icon reveals a screen that allows for changing of
the method for assigning an IP address to the keypad.
• Obtain an IP address automatically: this uses the DHCP method
of IP addressing
• Use the following address: this option requires that the Static
address of the keypad, as well as other network information be
entered. This is the recommended method to connect the TKP-7000
TKP-7000
Page 26