Digital Blue ALARM CLOCK Manual

ALARM CLOCK
GETTING STARTED
Congratulations on purchasing your LEGO Alarm Clock! The LEGO Alarm Clock gives
you a fun way to wake up in the morning. To get started, you will need to use a Philips/
Cross head screwdriver (not included) to remove item from packaging.
POWER SUPPLY
Your new LEGO Alarm Clock operates on 3 AA batteries (not included).
old and new batteries. 2. Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries. 3. Only use the batteries specified by the manufacturer.
CLOCK RADIO COMPONENTS
1.
2.
3.
4.
5.
6.
1. SNOOZE/LIGHT FUNCTION - Press down on knob to snooze your alarm or
activate backlight of LCD Display screen.
2. DATE FUNCTION - Displays the current Month and Date.
3. TIME/YEAR - Set the TIME and the YEAR. Only the TIME will display. The YEAR
feature displays only when setting the current MONTH, DATE, and YEAR.
4. DAYS OF THE WEEK - Displays the current DAY of the WEEK.
5. ALARM ON/OFF - Use this button to turn ALARM ON or OFF.
6. TIME SET - Press and hold this button when setting the TIME and DATE functions.
7. ALARM SET - Press and hold this button when setting the ALARM time and functions.
8. UP - Use this button to scroll UP through numerical digits when setting the TIME or ALARM.
9. DOWN - Use this button to scroll DOWN through numerical digits when setting the
TIME or ALARM.
10. ALARM - Displays the ALARM time when User has set ALARM. If ALARM time is not
set it will automatically default to 12:00.
11. BELL ICON- This icon indicates that the set alarm is on.
12. Zz ICON - This icon indicates that the SNOOZE function has been activated.
This icon indicates that the set alarm is on.
USING YOUR ALARM CLOCK
To operate your LEGO Alarm Clock, place 3 AA batteries in the battery compartment of
the device. The battery compartment is located in the back panel. Once the batteries are
placed correctly in the battery compartment the icons, functions, and numerical digits will
display on the LCD screen.
TO SET THE TIME:
To start, press and hold the "TIME SET" button located on the front panel of the device, in
order to enter into the TIME setting mode. Continuously press the "TIME SET" button to
complete the TIME setting feature cycle.
1. Press and hold the TIME SET button, the display will show flashing "12H" or "24H" hour
modes. Use the UP and DOWN buttons to set the hour mode (12 or 24 hour mode).
NOTE: The default setting is 12 hour mode.
2. Once the 12/24 hour mode to selected, press the TIME SET button again and the
HOUR digits will begin to flash. While pressing down the TIME SET button, use the UP
and DOWN buttons to set the correct time. When in 12 hour mode the PM indicates
afternoon hours.
3. After the correct hour is set press the TIME SET button again to set the MINUTE. Like
the hour digits, the minute digits will begin to flash. Use the UP and DOWN button to set
the correct MINUTE. To fast forward or backward when setting the time, press the UP or
DOWN button for one second.
TO SET THE DATE:
1. Before setting the DATE, the three steps to set the TIME must be completed. In order to
set the correct DATE, press the TIME SET button again and the YEAR will begin to flash in
the same location as the time on the LCD screen. Use the UP and DOWN button to set.
1. Do not mix
NOTE: The default setting is 2008 and is limited to 2099.
Press the TIME SET and the UP and DOWN buttons to set the correct MONTH in the
2.
upper left hand corner of the Alarm Clock.
3. Continue on by setting the DATE by pressing down the TIME SET and UP and DOWN
buttons. Once the YEAR, MONTH, and DATE are set the DAY OF THE WEEK will
automatially set and display on the LCD screen.
12.
11.
When all the above TIME and DATE settings are completed, press the TIME SET button to
return to normal TIME display. Leaving the unit for 30 seconds will automatically return to
10.
the correct TIME and DATE display.
TO SET THE ALARM:
1. Press and hold the ALARM SET button. The ALARM HOUR flash, use the UP and
DOWN buttons to set the correct ALARM HOUR.
2. Continue pressing the ALARM SET button again for the ALARM MINUTE to flash. Use
the UP and DOWN buttons to set the correct ALARM MINUTE.
9.
3. Press the ALARM SET button one more like to complete the setting and return to the
normal ALARM TIME display.
8.
7.
NOTE: Alarm time will default to 12:00 (00:00) if not set. The alarm time corresponds
with the same 12/24 hour mode as the mode set for the time. PM will appear on the
display screen if you are using the 12 hour mode.
TO TURN ALARM ON/OFF:
1. Press the ALARM ON/OFF button to turn the ALARM ON. The bell icon
appear above the ALARM TIME indicating that the ALARM is ON. Press the ALARM ON/
OFF button once more to turn the ALARM OFF. The bell icon
WHAT TO DO WHEN ALARM GOES OFF:
NOTE: The alarm clock has a built in power saving mode, which will automatically turn off
the alarm if the User does not press the SNOOZE or ALARM OFF button. When the set
alarm goes off, the User may do one of the following...
1. When the alarm goes off and the User takes no action to turn the alarm off, the alarm
will automatically go off after 1 minute, but continue to stay set so that the alarm goes off
at the same time the next day. The bell icon
alarm is still set.
2. When the alarm goes off you can press down on the SNOOZE button located on top
of the device. When the SNOOZE button is pressed the alarm will snooze for 5 minutes
before going off again. When SNOOZE is activated, the Zz icon will display.
3. You can also turn the alarm off by pressing any button on the LEGO Alarm Clock,
including the ALARM ON/OFF button. This will stop the current alarm and keep the same
set alarm set for the next day. The bell icon
TO ACTIVATE THE BACKLIGHT:
1. Press the SNOOZE/LIGHT button on top of the LEGO Alarm Clock to turn the
backlight of the display screen. The light will turn on for 5 seconds and then automatically
turn off until pressed again.
will
will disappear.
will continue to display indicating that the
will continue to display also.