Specifications; How To Use - True Induction Double Burner User Manual

III. Specifications
Power: ETL rated for 15 amp circuit
Voltage: 120v / 60Hz
Temperature Range: 150°F - 450°F (exact temperature settings)
Level Selection: Select settings 1 through 10
Max Time: Set timer up to 150 minutes
Material: Glass Ceramic Top
Single Burner Unit Measurements: 23.5" width x 15" length x 3" height
IV. How To Use
Plug the power plug into a standard outlet.
-
The ON/OFF switch will light up and the unit will sound to indicate on.
-
The device will remain in standby mode, awaiting user direction.
-
Place ferromagnetic cookware (with water, oil, or food already inside) on the center of the glass ceramic top center.
-
Now press ON/OFF button on the control panel, this will turn the cooktop on. The power display will blink and sound an-
-
other indicator.
The pre-set power level "5" is the default selection as the device turns on.
-
Using the +/- keys, you can change the settings at any time, ranging from 1-10. This is considered to be the HEAT func-
-
tion.
True Induction's Power Invariance Technology:
The maximum power of an individual burner level is at setting 10. But when operating both burners, their combined total
is level 10, meaning that when operating the two burners at the same time, they'll self adjust levels accordingly.
When you increase the power of one side, the power output of the other side will reduce automatically (i.e., one side is at
6, the other burner automatically reduces power to level 4, creating a total max 10 setting).
If one side of the double burner is using HEAT function and the other side uses the TEMP settings, the maximum HEAT
setting is "5".
5