Additional Information - HP ProBook 6455b Specification

QuickSpecs
Technical Specifications
Additional
information
DA - 13596 Canada — Version 18 — February 15, 2012
The battery type and chemistry used in the product is:
Li-ion
High capacity Lithium-Ion battery
This product is in compliance with the Restrictions of Hazardous Substances
(RoHS) directive – 2002/95/EC.
This HP product is designed to comply with the Waste Electrical and Electronic
Equipment (WEEE) Directive - 2002/96/EC.
This product is in compliance with California Proposition 65 (State of
California; Safe Drinking Water and Toxic Enforcement Act of 1986).
This product is in compliance with the IEEE 1680 (EPEAT) standard at the Gold
level, see www.epeat.net
Plastics parts weighing over 25 grams used in the product are marked per ISO
11469 and ISO1043.
This product contains 0% post consumer recycled plastic (by wt.)
This product is greater than 95.1% recycle-able when properly disposed of at
end of life.
Packaging Materials
External:
Corrugated carton – 360 g
Cardboard & misc. – 365 g
Internal:
Polyethylene low density – 15 g
EPE - Expanded Polyethylene – 90 g
The Corrugated carton packaging material is made from 70% – 80%
recycled content.
The Cardboard & misc. packaging material is made from 70% – 80%
recycled content.
The Polyethylene low density packaging material is made from 0%
recycled content.
The EPE –Expanded Polyethylene packaging material is made from 70%
– 80% recycled content.
HP follows these guidelines to decrease the environmental impact of product
packaging:
Eliminate the use of heavy metals such as lead, chromium, mercury and
cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging
materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
HP ProBook 6455b Notebook PC
HP ProBook 6555b Notebook PC
Page 39