Advertisement
QuickSpecs
Technical Specifications - HP LCD Monitor Quick Release
Mechanical
Additional components
Color
Notes
Supported weight
capacity
© Copyright 2014 Hewlett-Packard Development Company, L.P.
Microsoft, Windows, and Windows Vista are trademarks of the Microsoft group of companies. Adobe and Adobe RGB are trademarks of
Adobe Systems Incorporated.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in
the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Dimensions (H x W x D)
Weight
Eight 10 mm mounting screws (for attachment to VESA compliant monitor mounts)
Eight 15.5 mm mounting screws (for attachment to HP Thin Client products)
Four 20 mm mounting screws (for attachment to back of select HP flat panel monitor stands)
One Quick Release "locking" screw
Carbonite
1.
No HP monitors allow positioning of a thin client product between a monitor screen and its stand.
2.
The Quick Release device is not to be used between a monitor screen and its stand unless provided
that way from the factory.
3.
Under no circumstances is the Quick Release device intended to be used in an orientation where the
Release/Lock lever is oriented downward.
The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) depending upon
the mounting configuration used. Please note this is a total weight limit for all devices mounted, i.e. the
combined weight of the monitor and a second device such as an HP Thin Client cannot exceed 24 pounds.
Because mounting surfaces vary widely and the final mounting method and configuration may vary,
mounting fasteners are not supplied (other than the VESA-compliant screws). HP recommends that you
consult with a qualified engineering, architectural or construction professional to determine the
appropriate type and quantity of mounting fasteners required for your application and to ensure that your
mounting solution is properly installed to support applied loads.
DA - 13081 Worldwide — Version 10 — February 12, 2014
HP DreamColor LP2480zx Professional Display
Packaged
Unpackaged
Packaged
Unpackaged
7.8 x 6.25 x 1.5 in
(19.8 x 15.9 x 3.8 cm)
6.3 x 5.2 x 0.65 in
(16 x 13.2 x 1.65 cm)
1.1 lb (0.49 kg)
0.82 lb (0.37 kg)
Page 10
Advertisement
