Advertisement
CampVac™ Adapters and Parts
Vacuum Adapter
To Vacuum:
• Fully charge the product before using the vacuum function.
• Make sure the Dirt Filter is on the Dirt Frame and it is inserted into the
Vacuum Adapter.
• Connect the Vacuum Adapter to the Vacuum Port/Deflate as shown
below. The snaps will "click" when the Vacuum Adapter is fully
inserted into the product.
• Turn Power Switch to the "ON" position by pushing up on the power
switch and begin vacuuming.
NOTE: The product is intended to vacuum small areas and objects
no larger than the opening in the Vacuum Adapter. Do not attempt to
operate the vacuum without the vacuum adapter in place.
• Once vacuuming is complete, remove Vacuum Adapter, remove Dirt
Frame/Filter Assembly and empty debris stored in Vacuum Adapter.
Inflate/Deflate Adapter
Vacuum Adapter
Opening
Vacuum/Deflate Port
Inflate Port
Inflate/Deflate
Adapter Storage
Vacuum Adapter
Dirt Filter
Dirt Filter
Frame
Vacuum Adapter
Connected to Vacuum/
Deflate Port
Advertisement
