AC
Remaining
adaptor
battery capacity
not
is above low
connected
battery trigger
point
Remaining
battery
capacityis below
low battery
trigger point
Remaining
battery capacity
is exhausted
No battery
installed
Monitoring of power condition
As shown in the below table, the DC IN/Battery and Power indicators on
the system indicator panel alert you to the computer's operating capability
and battery charge status.
DC IN/Battery indicator
Check the DC IN/Battery indicator to determine the status of the battery
pack. The following indicator lights indicate the battery status:
Blinking amber
Amber
User's Manual
Table 6-1 Power conditions continued
Power on
• Operates
• DC IN/Battery LED:
amber
• Operates
• DC IN/Battery LED:
blink amber
Computer shuts down
No operation
•
• DC IN/Battery LED:
off
The battery charge is low, the AC adaptor must be
connected in order to recharge the battery.
Or, Indicates a problem with the power supply. You
should initially try plugging the AC adaptor into
another power outlet - if it still does not operate
properly, you should contact your reseller or dealer.
Indicates the AC adaptor is connected and the
battery is charging.
Power and Power-Up Modes
Power off
(no operation)
6-2