Service Lubrication - Great Dane Chariot GDRZ25KAE Operator's Manual

Service Lubrication

Grease
IMPORTANT: Avoid damage! If operating outside
that temperature range, contact your Servicing
dealer for a special-use grease.
Use a general all-purpose grease with an NLGI grade No.2
rating.
Wet or high speed conditions may require use of a special-
use grease. Contact your Servicing dealer for information.
Spray Lubricant
Use a general-purpose petroleum-based spray lubricant.
Lubrication Points
D
E
B
A
E
• Grease caster wheel bearings (A).
• Grease caster wheel pivot bearings (B).
• Grease HOC shafts (C).
• Grease mower deck thrust arms (D), located at the rear
of the mower deck.
• Grease mower deck spindle bearings (E) if equipped.
SERVICE LUBRICATION
D
C
E
B
A
MX9206
Service Lubrication - 12
NOTE: Use spray lubricant to lubricate the following
items:
C
• Lubricate mower deck idler pulleys (A-D).
C
B
A
• Lubricate hydraulic pump control arms (A).
• Lubricate control lever pivot shaft (B).
• Lubricate seat platform hinges (C).
• Lubricate throttle control cable (D).
• Lubricate choke control cable (E).
A
B
D
MX9252
E
D
MX9408