Product Information; Specifications; Maintenance - Philips AZ385 User Manual

6 Product
information
Note
•
Product information is subject to change without prior
notice.

Specifications

Amplifier
Rated Output Power
Frequency Response
Signal to Noise Ratio
Total Harmonic Distortion <1 %
Audio-in Input
Disc
Total Harmonic Distortion <1%
Frequency Response
Signal to Noise Ratio
Tuner
Tuning Range
Total Harmonic Distortion <3 %
Signal to Noise Ratio
Speakers
Speaker Impedance
2 x 1 W RMS
63 -14000 Hz, -3 dB
>57 dBA
650 mV RMS
63 -14000 Hz, -3 dB
>57 dBA
FM: 87.5 - 108MHz
>50 dBA
8 ohm
General
Power supply
- AC Power
- Battery
Operation Power
Consumption
Standby Power
Consumption
Dimensions - Main Unit
(W x H x D)
Weight - Main Unit

Maintenance

Clean the cabinet
• Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits, ammonia
or abrasives.
Clean discs
• When a disc becomes dirty, clean it with
a cleaning cloth. Wipe the disc from the
centre out.
• Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
Clean the disc lens
• After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
play quality, clean the disc lens with Philips
CD lens cleaner or any commercially
available cleaner. Follow the instructions
supplied with cleaner.
220 - 240V, 50/60 Hz
9 V, 6 x 1.5 V R14/UM2
15 W
< 0.5 W
261 x 123 x 245 mm
1.1 kg
EN
10