Play; Play Disc; Listen To Fm Radio; Play From An External Device - Philips AZ105 User Manual

4 Play

Play disc

1
Switch the source selector to CD.
2
Lift to open the disc compartment.
3
Insert a disc with the printed side facing up,
then close the disc compartment.
» Play starts automatically.
Control play
/ Select an audio file;
Press and hold to fast-forward
or fast-reverse the track during
playback, then release to resume
play.
Pause or resume play.
Stop play.
REPEAT [ ]: Play the current track
repeatedly.
[
repeatedly.
SHUFFLE [ ]: Play tracks randomly.
- VOLUME + Adjust volume.
Enhance bass
To turn dynamic bass boost on or off, slide DBB
switch to ON or OFF.
Program tracks
You can program a maximum of 20 tracks.
1
Press to stop playback.
2
Press PROG to activate the program
mode.
» [PROG] (program) begins to blink.
3
Press / to select a track number,
and then press PROG to confirm.
]: Play all tracks
4
Repeat step 3 to program more tracks.
5
Press to play the programmed tracks.
» During play, [PROG] (program) and
the preset number are displayed.
• To erase the program, press

Listen to FM radio

Note
•
Position the antenna as far as possible from TV, VCR or
other radiation source.
•
For optimal reception, fully extend and adjust the
position of the antenna.
1
Switch the source selector to FM.
2
Rotate - TUNING + to tune to an FM
radio station.

Play from an external device

You can also listen to an external audio device
through this unit.
1
Switch the source selector to Audio-in.
2
Connect an audio cable (3.5mm, not
supplied) to:
• the Audio-in socket on the unit.
• the headphone socket on an external
device.
3
Play the external device (see the device's
user manual).
Note
•
The Audio-in socket is not for headphones.
twice.
EN 8