Advertisement
HDT206EM OWNERS MANUAL
was very audibly superior. In practice it is also superior because you don't have to try to
computer model the ideal shape for any given cone geometry. The only variable with this
design is length which must be determined for each application.
As for it's altering the magnetic properties of the pole which is obviously going to change
the shape of the magnetic flux in the gap and alter driver specs, so far no negative effects
on the sound could be detected. If the alteration of these specs actually makes the driver
sound better then it stands to reason there will be a driver somewhere that will react in a
negative way. My observations so far indicate the change is minimal.
Advertisement
