Table of Contents Introduction………………………………..…………….………..…….1 1. About IFM-500……………………………………………..…….……1 2. Overview…………………………………………….………...….….…..2 3. Before Using...…………………………………………….….…..…..3 How to operate IFM-500…………………………………...…..…..4 1. Pairing and connecting with Bluetooth cell phone……….………………4 2. Adjusting FM frequency……………………………………………..…...4 3. Playing music…………………………………………………………….5 4. Making calls………………………………………………………...…..5 5. Control functions …..…………………………..………….6 6.
IFM-500 is a Bluetooth hands-free car kit with a Bluetooth stereo receiver and built-in FM transmitter. It also has a DC 5V USB Charging socket to power or charge other devices. With the IFM-500 you can make calls safely while driving, and listen to your music. IFM-500 has the following features: Bluetooth hands-free car kit—Pair with a Bluetooth cell phone or...
(USB cable not included) In-car holder IFM-500 has a flexible holder for holding cell phones, so you can operate easily while driving. 2. Overview Flexible holder Connecting slot Microphone USB function switch USB outlet Knob button...
Adjust the car holder to secure your phone. Pull up the holder iv. Press the power switch on cigarette adaptor to activate the IFM-500, and the indicator light will turn blue. Power switch...
After initially pairing and connecting your cell phone you don‟t need to do it again! Your phone will connect automatically! Every time the IFM-500 is turned on, it will connect to the last connected device automatically. When the device is in standby mode, and not connected with other...
IFM-500 is the same as the car radio. 2) Auto-search function: press and hold knob button for 2 seconds and release it until the display shows „-----‟. IFM-500 wills auto-search an empty station. Remark: IFM-500 will remember and show last used frequency automatically after turned on.
Display IFM-500 Adjust Turned on 1) Short press knob button frequency once, IFM-500 will enter frequency adjustable mode and the LED display will flash 2) Rotate knob button to adjust frequency. picture to the right shows: frequency is 107.9MHz.
6. Line out This product has a Line out function. You can transmit the audio (music/call) to the car stereo system via Line out. When you use Line out, IFM-500 will turn off FM transmitter automatically.
9. Factory Reset While the device is turned off, press button for 6 seconds simultaneously. IFM-500 will delete all paired devices and the FM frequency, also restore factory settings. Turn off IFM-500, and then turn on...
Bluetooth device Care and maintenance Read the following recommendations before using IFM-500. Following these you will help enjoy your product for many years. Keep it dry and don‟t take it to damp places to avoid the product‟s internal circuit being affected.
Please make sure your car‟s FM radio has been set to an unused Frequency; b) Ensure both IFM-500 and your car‟s FM radio use the same frequency; c) Please make sure IFM-500 is in the effective working range. 2. Why can’t my IFM-500 be paired with a Bluetooth device? a) Please make sure IFM-500 is in pairing mode;...
Page 13
Storage temperature -20~60℃ Dimensions 90×65×208mm Weight 143g Notes: 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the IFM-500 and is the answer not in the manual?
Questions and answers