Srs Components And Functions - Hyundai SantaFe Owner's Manual

Operation maintenance specifications
Hide thumbs Also See for SantaFe:
Table of Contents

Advertisement

Safety system of your vehicle
11
11
C040100AFD

SRS components and functions

The SRS consists of the following com-
ponents:
1. Driver's front air bag module
2. Front impact sensors
3. Passenger's front air bag module*
4. Retractor pre-tensioner assemblies*
5. Side impact sensors*
6. Curtain air bag modules*
7. Side air bag modules*
8. SRS control module (SRSCM)/
Rollover sensor*
9. Air bag warning light
10. Passenger's front air bag OFF indi-
cator (front passenger's seat only)*
3
38
11. Passenger's front air bag ON/OFF
switch*
*: if equipped
10
10
OCM030200R
The SRSCM continually monitors all ele-
ments whilst the ignition switch is ON to
determine if a frontal or near-frontal
impact is severe enough to require air
bag deployment or pre-tensioner seat
belt deployment.
The SRS air bag warning light on the
instrument panel will illuminate for about
6 seconds after the ignition switch is
turned to the ON position, after which the
air bag warning light should go out.
WARNING
If any of the following conditions
occurs, this indicates a malfunction
of the SRS. Have a HYUNDAI autho-
rised repairer inspect the air bag
system as soon as possible.
• The light does not turn on briefly
when you turn the ignition ON.
• The light stays on after illuminat-
ing for approximately 6 seconds.
• The light comes on whilst the
vehicle is in motion.
• The light blinks when the ignition
switch is in ON position.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents