Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for HD Max Cam PQ0244
-
Page 1: User Manual
USER MANUAL RoHS... - Page 2 Never look directly into the laser beam and never view the laser beam using an optical instrument. Do not point the laser beam at people or animals. Routine care Clean your HD Max Cam with a soft cloth. Do not use abrasive powders or solvents, such as benzene or thinner. Disclaimer HD Max Cam will not, under any circumstances, be responsible for injuries or property damage incurred during the use of its products.
-
Page 3: Technical Specifications
Technical specifications 1. Recording resolution：1920 x 1080 (30 fps) / 1280 x 720 (60 fps) 2. Image sensor: 5 Mega pixel, 1/2.5-inch CMOS sensor 3. White Balance: Auto 4. Wide angle lens : 135° in 720p, 110° in 1080p 5. Alignment:Cross laser positioning 6. -
Page 4: Quick Start Guide
Quick Start Guide ABOUT THE CAMERA 1. 135° lens 8. Press and Hold for 3 seconds to 2. Cross laser positioning power on or power off the Cam 3. Microphone 9. Press and Hold for 3 seconds to Menu Return key / Delete key 4. - Page 5 Quick Start Guide ABOUT THE CAMERA 13. Locking key of rear cover 19. HDMI Port (cable not included) 14. Recording indicator 20. Recording indicator 15. USB 2.0 Port (file transfer/charging) 21. Battery Latch 16. Micro-SD Holder 22. 1/4-inch to 20 tripod thread 17.
- Page 6 Quick Start Guide ABOUT THE CAMERA Choose the appropriate mount and ensure it is fitted securely and tightly so that it can not come loose while shooting your videos. Press [ ] key and hold for 3 seconds to power up the camera. Adjust the lens to the proper angle Face a blank surface and press the laser button to turn on the lasers...
-
Page 7: Installing The Battery
Installing the battery - Slide the lock on the rear cover and it will automatically open. - Follow the instructions. Insert the battery with the correct Polarity (+/-) - Push the rear cover closed. - NOTE: If you do not intend to use the product for a long time, please remove the battery. - Page 8 Playback on TV/ display device Connect one end of AV-out cable / HDMI cable to the DIGITAL interface on the base of the camera, and connect the other end of AV-out cable / HDMI cable to your TV or other display device. Turn on the TV or display device, and enter into the AV-in / HDMI mode.
-
Page 9: Installing The Mounts
Playback on a PC Connect the USB cable to the camcorder properly, and then connect the other end to a USB port of a PC. Charge the battery using the AC power adaptor or the USB cable. Recharging the battery from your computer: AC Adaptor If the camera fails to start recording, the battery has probably run down and needs to be recharged. -
Page 10: System Function Settings
Description of Function Icons 1. Record Mode 2. Video Resolution 3. System time 4. Record Overwrite Mode 5. SD card icon 6. Battery Life Video Mode 8. Current Selection video file System function settings Record Mode Video Mode 【 】 1. - Page 11 System function settings STAMP: With this setting, the current time will be stamped on the video and the recording time can be seen during playback. OFF: No DATE and CLOCK stamp (Default) DATE: DATE only CLOCK: CLOCK only DATE/CLOCK: both DATE/CLOCK DATE/ CLOCK: There is day / month / year / hour / minute to set up on the camera.
-
Page 12: Package Content
PACKAGE CONTENT Dust Proof Cover Vented Helmet Mount 3M sticker x 2 Elastic Strap Battery Battery Charger Screw cap USB Cable AV-OUT Cable User Manual CD INFORMATION FOR USERS according to European Directives 2002/95/EC and 2003/108/EC on the restriction of the use of hazardous substances in electrical and electronic equipment and waste disposal. -
Page 13: Warranty
Warranty This product is guaranteed against manufacturing defects for one (1) year from the original date of purchase. HD Max sole obligation in the event of such defects during this period is to repair or replace the defective part or product with a comparable part or product at HD Max sole discretion. - Page 14 Recycled paper Copyright c 2011 All rights reserved...