Cub Cadet i1046 Operator's Manual page 26

NOTE: References to left and right are from the front of the
tractor in the following instructions.
• Pull the right side of the belt forward and place the nar-
row V side of the belt into the PTO pulley.
• While holding the belt and pulley together, rotate the
pulley to the left. Continue holding and rotating the
pulley and belt until the belt is fully rolled into the PTO
pulley. Refer to Figure 7-6.
WARNING!: Use caution to prevent pinching
your fingers when rolling the belt onto the PTO
pulley.
46" Mower Deck
50" Mower Deck
6 s 7— s
ectiOn ervice
Figure 7-4 Replacement Belt Routing 46" Mower Deck
Figure 7-5 Replacement Belt Routing 50" Mower Deck
Figure 7-6
Replacement Belt Routing
Replacement Belt Routing
PTO Belt
Rotate
Pulley