Parts Drawing - Graco 224892 Instructions And Parts List

Model 224892, Series A, aluminum surge suppressor with PTFE diaphragm
Model 224893, Series A, aluminum surge suppressor with buna–N diaphragm
Model 224894, Series A, stainless steel surge suppressor with PTFE diaphragm
Model 224895, Series A, stainless steel surge suppressor with buna–N diaphragm
10
Torque to
10 to 15 in-lb
(1.1 to 1.7 N.m)
Torque to 6 to 10 ft-lb
(8 to 14 N.m)
19
Lubricate with
lithium-base grease
11
Torque to
10 to 15 in-lb
(1.1 to 1.7 N.m)
31
Torque to
5 to 7 ft-lb
(7 to 10 N.m)
*32
Flat side faces up
(PTFE, 183542) **13
(buna–N, 190148)
(108839) **21
Used on Models 224892 and
224894 only
*12
Flat side faces down
(110004) *15**
*14
Apply sealant to threads

Parts Drawing

8
6
4
33
Apply sealant tape to threads
30
29
* The replacements for these parts are available
in Diaphragm Plate Kit 239158. See page 14.
Purchase this kit separately.
** The replacements for these parts are available
in Diaphragm Repair Kits D05001 and D05007.
See page 14. Purchase the applicable kit
separately.
*** The replacements for these parts are available
in Repair Kits D05210 and D05270. See page
14. Purchase the applicable kit separately.
18*** (acetal, 186692)
(sst, 15V282)
17*** (acetal, 186691)
16*** (110636)
1
7
(sst, 15V281)
2
Torque to
3 to 6 ft-lb
(4 to 8 N.m)
3
9
Chamfer
faces out