Download Print this page

Advanced Settings - Cary Audio Design Cinema 12 Quick Start Manual

Hdmi v1.4a, 32 bit audio, hd surround processor
Hide thumbs Also See for Cinema 12:

Advertisement

ADVANCED SETTINGS

Password – Enable, disable and configure a password for the Cinema 12.
Zone 1 & 2 Master Volume – Set master turn on volume for Zone 1 & 2.
CD Pure Audio
 VERY IMPORTANT –
will be possible as this will bypass all "processing" and send a pure signal
straight through with gain only, regardless of what source you are listening to.
If you want subwoofer output while listening to Movies or Music, you MUST
have this feature turned OFF.
HDMI Audio Out – When
format selected. When
AV Sync Delay – Adjusts the delay and timing when audio and video are not in sync
from 1 ms to 100ms. Turn off to disengage this feature.
Bright – Adjust the brightness of the front panel display, or turn it off entirely.
Edit Custom Names – Allows for editing the custom names for sources.
IR Controls – Allows for turning on or off of any or both the front and rear IR's.
Zone 2 IR Controls - Allows for turning on or off of any or both the front and rear IR's.
Rear IR – Allows for normal or inverted polarity of the IR signal.
Zone 2 IR Mode – Allows for normal or inverted polarity of the IR signal.
Triggers – Determines the 12-volt triggering when specific Zones are turned on.
Auto Input Seek – Turn on to have the Cinema 12 automatically detect and select
an input source, or turn off to select manually.
Late – This feature decreases the dynamic range of the output signal for times when you
don't want to disturb others. Soft sounds and loud sounds will be closer in level to avoid
loud dramatic peaks during some scenes. Works only with Dolby Digital or Dolby Digital
EX Sources.
Max Volume Out – This allows for setting a maximum volume output to
protect your electronics and speakers from overloading.
Restore Defaults – Restores ALL settings to factory defaults.
Go to Main Menu – Exit Setup Menu and return to normal display screen
When CD Pure Audio is set to On, NO subwoofer output
On
is selected, audio will pass through same as the decoding
OFF
is selected, no audio will pass through.
1020 Goodworth Drive
Apex, NC 27539
919-355-0010
info@caryaudio.com
www.caryaudio.com
3

Advertisement

loading