Advertisement
Quick Links
Technical Specifications
Voltage Requirement
For 230V the working range is 207V to 253V 50-60Hz
For 115V the working range is 104V to 126V 50-60Hz
Power Consumption 40VA
Power Output 25W RMS Output (8W)
Dimensions:
Height - 355mm
Width - 320mm
Depth - 210mm
Weight (Approx) - 6.3Kgs
Check out the full Carlsbro range of products, including PA systems,
amplifiers and stacks suitable for electric guitar, acoustic instruments,
bass guitar, keyboards and much more. See our website
(www.carlsbro.com) for more details.
Please take the time to fill in your guarantee card and return it to the
address printed on the back, or alternatively fill in your
guarantee card online at www.carlsbro.com
Together we will make music matter
COMPLIANCE
This equipment is designed to comply with the following standards;
BS EN50082-1:1992
BS EN55013:1990
BS En60065
When this product reaches the end of its life it should
not be disposed of with domestic waste, instead contact
your local authority or the shop where you purchased
this product for environmentally sound disposal.
TEL: +44 (0) 8452 582 912
FAX: +44 (0) 1773 860 720
EMAIL: sales@carlsbro.com
WEB: www.carlsbro.com
CARLSBRO ELECTRONICS LIMITED
Evolution House, 6 Maisies Way, The Village, South Normanton, Derbyshire.
DE55 2DS England
WORLD CLASS PA & AMPLIFICATION SYSTEMS SINCE 1959
"Live the dream, as you are now a part of
over 50 years of Carlsbro Sound experience.
All the worlds musicians use Carlsbro and
now you are part of that global family of
sic makers. Thank you for buying
mu
Carlsbro"
Andrew Bishop
Chairman
WORLD CLASS PA & AMPLIFICATION SYSTEMS SINCE 1959
Advertisement
Related Manuals for Carlsbro KICKSTART 25 DSP
Summary of Contents for Carlsbro KICKSTART 25 DSP
- Page 1 Width - 320mm Depth - 210mm Weight (Approx) - 6.3Kgs Check out the full Carlsbro range of products, including PA systems, amplifiers and stacks suitable for electric guitar, acoustic instruments, bass guitar, keyboards and much more. See our website (www.carlsbro.com) for more details.
- Page 2 Carlsbro Electronics Limited constantly seek ways to enhance our products, and improvements take place continually. Whilst every effort is made to produce up to date literature, Carlsbro Electronics Limited reserve the right to alter specifications without prior notice.
- Page 3 Carefully unpack the unit. If it appears damaged in any way, return it to the retailer it was purchased from in its original packaging. Carlsbro Electronics Ltd cannot accept any responsibility for damage arising from the use of non-approved packaging...
- Page 4 15. Power LED: The LED will illuminate when the unit is turned on. When the amp is switched off, the LED will slowly go out. REAR PANEL FEATURES www.carlsbro.com 7 8 9 10 1. Input Socket: This is a high impedance unbalanced mono jack socket.