How To Connect For A Seven Channel System - McIntosh MC8207 Owner's Manual

Figure 6 Figure 7
9. Place the IMPEDANCE Switch to the position
(4 ohm or 8 ohm) to match the impedance of the
connected Loudspeakers. In the event that some
of the Loudspeakers in the system are differ-
ent impedance, use the impedance of the Front
Loudspeakers. If the Loudspeaker's impedance is
6 ohms, select the 4 ohms setting. Refer to "Gen-
eral Information" Note 4 on page 3 for additional
information.
WARNING: Loudspeaker terminals are hazardous
live and present a risk of electric shock.
For additional instruction on making
Loudspeaker Connections contact your
McIntosh Dealer or McIntosh Techni-
cal Support.
10. Connect the MC8207 power cord to an active AC
outlet.
Figure 8

How to Connect for a Seven Channel System

9