Display And Control Panel; Warm - Frigidaire FPDC12D7MS Use & Care Manual

DISPLAY AND cONTROL PANEL

B
A
A Brew On/Off
B Auto On/Off
Brew On-Off Button
The Coffee Maker features one touch brewing that
will begin brewing by pressing the Brew on-off button
whether the LCD is active or in standby mode. To turn
off the Coffee Maker, press the Brew On/Off button
again.
Option Select
Press the Option Select button to cycle through the
following options:
Set clock:
1 To set the clock, press the Option Select button
until the display reads Clock. Then, press the up-
button to set the current hour. Once the hour is
correct, press the Set button.
2 Press the up-button to select the current minute
setting. Once again, press the Set button.
3 Press the up button to select either AM or PM,
and then press Set to complete the clock setting
process.
4 To exit the Options menu, press and hold the
Option Select button.
4
c
D
c Options Select
D LCD Display
F
Auto:
1 To set the auto start timer, press the Option Select
button until the display reads Auto. Then, press the
up-button to set the hour. Once the hour is correct,
press the Set button.
2 Press the up-button to select the desired minute
setting. Once again, press the Set button.
3 Press the up-button to select AM or PM. Press the
set button.
4 Now that the Auto time is set, press the Auto on-
off button to turn the feature on. The auto timer is
now set and will begin brewing at the designated
time. To turn the Auto feature off, press the Auto
on-off button again.

Warm:

1 To set the amount of time that the warming plate
remains on, press the Option Select button until
the arrow points to "Warm".
2 Press the up-button to advance the timer in
10-minute intervals until the desired time is
reached. The warming plate can be set to remain
on for up to 120 minutes.
3 Press the Set button. The warming plate can be set
to remain on for up to 120 minutes or disabled by
setting to zero.
E G
E Menu Up-arrow
F Coffee strength
G Set