ATSC Digital TV Receiver Box Operation Manual page 6

5、 Auto Search
1>. The receiving source of Type: choose the cable or antenna of receiving source of type, the default value: the
antenna. As follows ATSC-002
2>. Enter to the interface of auto-search setting, select the Start Search to enter the auto-search interface
automatically search. As follows ATSC-003
3>. Want to stop, press the EXIT button of the remote control to stop the searching process.
4>. When you select Reset, the system will be whether you would like to restore the dialog box of first default
5>. SNR is the signal ratio. As follows ATSC-004
Note: When the automatic search is completed or ceases to automatically search and then displays the following
information. Prompted the total number of television channels of searching.
ATSC-002
ATSC-003
ATSC-004
6