Changing The Delay Time; Canceling The Time Delay; Starting The Program; Progress Of Program - Blomberg WM 67121 NBL00 Owner's Manual

steps of three hours for the remainder
(1, 2, 3, 6, 9, ...24).
1. Open the loading door, place
the laundry inside and fill detergent
disperser.
2. Set the washing program, spin speed
and, if required, select the auxiliary
functions.
3. Press "Time Delay" button gradually
to adjust the desired time.
4. Press "Start/Pause/Cancel" button.
The time delay will start to count down.
The ":" in the middle of the displayed
time delay will start flashing.
C More laundry may be loaded during
the time delay period.
5. At the end of countdown process,
":" will light up continuously, "Ready"
light will go off and the relevant program
follow-up light will come on according to
the selected program.

Changing the delay time

If you want to change the time during
the countdown:
1. Press "Start/Pause/Cancel" button.
":" in the middle of the screen will stop
flashing.
2. Press "Time Delay" button to adjust
the desired time delay.
3. Press "Start/Pause/Cancel" button.
4. The ":" in the middle of the displayed
time delay will start flashing.

Canceling the time delay

If you want to cancel the time delay
countdown and start the program:
1. Press "Start/Pause/Cancel" button.
The ":" in the middle of the displayed
time delay will stop flashing.
2. Press "Time Delay" button to
decrease the time delay. "0:00" will
appear on the display eventually.
3. Press "Start/Pause/Cancel" button to
start the program.

Starting the Program

1. Press "Start/Pause/Cancel" button to
start the program.
2. Program follow-up lamp "wash"
showing the startup of the program will
light up.

Progress of program

Progress of a running program is shown
through the program follow-up indicator.
At the beginning of every program step,
the relevant indicator lamp will light up
and light of the completed step will turn
off. The indicator that is lit up at the far
right of the series of indicator indicates
the step that is being carried out.
C If the washer is not spinning, the
automatic spin correction system has
been activated due to an excessive
unbalanced distribution of laundry in
the drum.
Changing the selections after
the program has started
Turning the cycle selector knob while
the cycle selector is in a normal flow will
not change the program.
Switching the washer to standby
mode
Press "Start/Pause/Cancel" button
momentarily to switch your washer
to the standby mode. "Start/Pause/
Cancel" lamp will start flashing to
indicate that the washer is switched to
standby mode.
Selecting or canceling an auxiliary
function in standby mode
Auxiliary functions can be cancelled or
selected in accordance with the step
the program is at. For example, if your
washer is on the main wash cycle or on
the first rinse cycle, you may select extra
rinse auxiliary function.
Super wash option may not be selected
on any circumstances once the wash
cycle begins.
Quick wash option may only be selected
when your washer is on the main wash
cycle.
C The spin speed which is selected
first will keep on being valid even if
the spin speed adjustment button
is pressed during the wash cycle to
change the spin speed. Press "Start/
Pause/Cancel" button and switch the
23
EN