Pro'sKit SS-803F User Manual page 9

Important! You can repeat the cleaning process in order to intensify the cleaning
effect. If the cleaning process is started several the liquid becomes very warm
(approx. 41 after the first cleaning process and approx. 60
℃
five-minute cooling down phase). However, it is recommended that between the cleaning
processes a pause of at least five minutes is inserted in order to allow the device to cool
down.
→ If you would like to repeat the cleaning process, press the SET button.
→ Use the SET button to select the desired time from the five possibilities.
→ Press the ON switch and start the cleaning process.
In order to stop the cleaning process earlier than the time set,
press the OFF switch. To resume the cleaning process, press
the ON switch again. Alternatively, you can use the SET button
to select a new time interval and then press the ON switch
again.
After the cleaning process has ended, remove the mains plug
from the socket, open the cover and take the cleaned object out
of the device.
Note: In order to avoid to avoid lime residues, always
empty the stainless steel tank and wipe dry with a fabric
or microfiber cloth.
We recommend that the liquid should be renewed after
every cleaning process if possible.
Please store the device in a cool and dry place.
8
after the third in spite of a
℃