Location; Set Up - Hoshizaki KM-900MAF Instruction Manual

Modular crescent cuber
Hide thumbs Also See for KM-900MAF:
Table of Contents

Advertisement

3. LOCATION

This icemaker is not intended for outdoor use. Normal operating ambient
temperature should be within +45°F to +100°F;
temperature should be within +45°F to +90°F. Operation of the icemaker, for
extended periods, outside of these normal temperature ranges may affect
production capacity.
For best operating results:
• Icemaker should not be located next to ovens, grills or other high heat producing equipment.
• Location should provide a firm and level foundation for the equipment.
• Allow 6" clearance at rear, sides and top for proper air circulation and ease of maintenance and/
or service should they be required.

4. SET UP

1) Unpack the Storage Bin, and attach the four adjustable legs provided (bin accessory) to the
bottom of the Storage Bin.
2) Position the Storage Bin in the selected permanent position.
3) Place the icemaker on the top of the Storage Bin.
4) Secure the icemaker to the Storage Bin, by using the two mounting brackets and the four
bolts provided. See Fig. 2.
5) Level the icemaker/Storage Bin in both the left-to-right and front-to-rear directions. Adjust
the Ice Bin Legs to make the icemaker level.
6) Replace the panels in their correct position.
WARNING
Fig. 2
10
Normal operating water
A1JA10A9810

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-900mwfKm-900mrfKm-900mrf3

Table of Contents