Related Manuals for Firstech, LLC. AR-600R
Summary of Contents for Firstech, LLC. AR-600R
-
Page 1: User Manual
8102REUSA000702 / AR-600 Ver 1.1 By Firstech LLC Version 1.0 www.firstechllc.com www.compustar.com User Manual Applicable to the following remote(s) AR-600R (1Way 4Button Remote) FCC ID : VA5JR260A433 Toll Free : 888-820-3690 21911 68th Ave S Kent, WA 98032... - Page 2 Thank you for purchasing a Firstech AR-600R system for your vehicle. In order to truly enjoy the benefits of this system, we recommend that you Read this entire manual. Please note that this manual applies to the AR-600R 4 Button Remote. The 600R remote can be used with our remote start and keyless (CS600-S / Sending Commands AR600-S) System.
- Page 3 Remote Reference Quick Reference AR-600R (1-Way 4Button Remote) When servicing or loaning your vehicle to others, your remote start system should be placed in Valet mode. Valet mode prevents the system from Applicable to the Following models: remote starting and disables all alarm functions.
- Page 4 Quick Reference Quick Reference Button Duration Additional Function / Description Additional Button Duration Function / Description Programming Required Programming Required 0.5 seconds Locks doors and/or arms alarm. 0.5 seconds CS600-A Alarm Only Ignition Controlled Door Locks CS600-A Alarm Only 3.5 seconds Panic/vehicle locater (flashes vehicle’s parking lights and sounds siren and horn).
- Page 5 When in range, and a button has been pressed, the remote bright blue LED will illuminate and vehicle’s parking lights will flash. For example, to send a remote chirp twice to show it is off. start command from the AR-600R, hold down the Button for 2.5 seconds. The remote bright blue LED will come on solid and then flash.
- Page 6 General System Functions General System Functions Hold button for 2.5 seconds to release the trunk or hatch. If you are in range, the vehicle’s parking lights will flash once and/or Only available with CS600-A alarm only system. siren chirp once indicating that the trunk release command has been successfully transmitted. Hold buttons simultaneously for 2.5 seconds to turn the shock sensor on and off.
- Page 7 General System Functions Remote Coding / Programming Routine IMPORTANT: The AR-600R remotes are preprogrammed to your system. In the even you need to program your remotes follow this simple procedure below. Only available with CS600-S / AR600-S Remote start only system.
- Page 8 Remote Start Error Diagnostic Limited Lifetime Warranty Firstech, LLC Warrants to the original purchaser that this product shall be free of defects in material and workmanship under normal use and circumstances for the period of Only available with CS600-S / AR600-S remote start only system. time that the original owner of this product owns the vehicle in which it is installed;...