Bosch Electronic Operating Instructions And Installation page 17

Modifying a selected programme
If you have selected and started an incorrect
wash programme it can be corrected in the
following way:
m Turn the programme selector to «Off».
m Set the programme selector to the position
for the required programme. The
«Wash/Ready» indicator light flashes.
m Press the «Start» button
The «Wash/Ready» indicator light comes
on. The newly selected programme starts.
Interrupting a wash programme
If you should wish to stop a programme already
in progress:
m Turn the programme selector to «Off».
m Turn the programme selector to the
«Drain» o «Spin» programme position.
The «Spin/End» indicator light flashes.
If selecting the «Spin» function, adjust the
required spin speed (do not select the
«Rinse hold» option.):
m Press the «Start» button.
The «Spin/End» indicator light light
comes on.
Wash programme end / Taking
the laundry out of the machine
The «Spin/End» indicator light flashes.
m Turn the programme selector to «Off».
If necessary:
m Select an additional programme («Drain»,
«Spin» or«Rinse»).
m Press the «Start» button.
m When the additional programme selected
has finished, turn the programme selector
to «Off».
Taking the laundry out of the machine
m Close the tap.
m Open the door.
If the door cannot be opened:
Wait 2 minutes (the machine's safety device
is activated) or:
If the «Rinse hold» option was selected,
there will still be water inside the appliance.
Select an additional programme («Drain» or
«Spin») to pump out the water.
m Take the laundry out of the machine.
! Remove any foreign material or metal
objects (clips, fasteners, money, etc.) which
may have collected in the drum or rubber
seal. Risk of rusting.
Leave the door open so that air can circulate
inside and dry the appliance.
17
en