Gas Burners; Switching On Manually; Switching On Automatically; Safety System - Bosch Cooking Hob Instruction Manual

Gas burners

There are indications to show which burner
each control knob operates.
It is essential to ensure that all the burner
parts and pan supports are correctly
installed for the appliance to work correctly.

Switching on manually

Press the chosen burner control knob
1.
and turn it anticlockwise to the required
setting.
Use any type of lighter or flame (cigarette
2.
lighter, matches, etc.) and bring it close
to the burner.
8

Switching on automatically

If your hob can be switched on
automatically (ignition sparkers):
Press the chosen burner control knob
1.
and turn it anticlockwise to the maximum
power setting.
While the control knob is still pressed
down, sparks are produced on all
burners. The flame ignites.
Release the control knob.
2.
Turn the control knob to the required
3.
setting.
If it does not come on, turn the control
knob to the off setting and repeat the steps
above. This time, press and hold the
control knob for longer (up to 10 seconds).
m
Risk of deflagration!
If after 15 seconds the flame does not
ignite, switch off the burner and open a
nearby window or door. Wait at least one
minute before trying to switch the burner
back on.

Safety system

Depending on the model, your hob may
have a safety system (thermocouple) that
prevents the flow of gas if the burners
accidentally switch off.
,JQLWLRQ
VSDUNHU 7KHUPRFRXSOH
To ensure that this device is active:
Switch on the burner as usual.
1.
Without releasing the control knob, press
2.
and hold it down firmly for 4 seconds
after lighting the flame.