American Standard Heritage Whirlpool 2805.XXXW Installation Instructions

HERITAGE
5' x 42"™
HIGH GLOSS ACRYLIC
SHOWN LESS ALL FITTINGS
762mm
(30)
305mm
(12)
1067mm
(42)
SAFE-T-HEATER
REMOVABLE
51mm(2)
BLANK
546mm
(21-1/2)
495mm
(19-1/2)
ROUGH
FLOOR
INTEGRAL
FEET
SUPPORT
GENERAL SPECIFICATIONS FOR 2805 WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT 3 )
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP
SYSTEM II PUMP
GENERAL INSTALLATION INFORMATION
Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor
immediately.
After inspection and during installation, protect the bath from construction damage. After installation, and before
enclosing with wallboard, tile, etc., water test the unit and check for leaks.
Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect
the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump,
motor, or piping system.
Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and
enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead
(required for recess installations).
Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.
WARNING! Do not lift whirlpool by the piping harness at any time.
FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.
752294-100 Rev. K
2805.XXXW
SERIES WHIRLPOOL

INSTALLATION INSTRUCTIONS

1524mm
(60)
INTEGRAL
FITTING DECK
178mm x 381mm
(7 x 15)
FLOOR
CUTOUT
ON/OFF
SWITCH
OUTLINE OF CUTOUT
1486mm x 1029mm
(58-1/2 x 40-1/2)
LEVELING STRINGER
NOT FOR SUPPORT
133mm
(5-1/4)
C/L OF
OVERFLOW
64mm
(2-1/2)
1-1/2 N.P.T.
THREADS
1-1/2 O.D.
121mm
TAILPIECE
(4-3/4)
60 x 42 x 21-1/2 In. (1524 x 1067 x 546mm)
130 Lbs. (59 Kg.)
689 Lbs. (310 Kg.)
64 Gal. (243 L)
52 Gal. (197 L)
43 x 22 In. (1092 x 559mm)
55 x 35-1/2 In. (1397 x 902mm)
15 In. (381mm)
39 Lbs./Sq.Ft. (191 Kgs./Sq.m)
27.8
47.4
1.6 HP, 9.7 AMPS ,120V.
2.1 HP, 15.6 AMPS ,120V.
THANK YOU...
152mm
(6)
for selecting an American Standard bath. Your new
bath is shipped to you after careful inspection. The
C/L OF
whirlpool version is completely assembled with pump,
DRAIN
motor, and system piping. All you need to finish the
PUMP
installation are your selected fittings and electrical
connections for a whirlpool.
PROVIDE ACCESS
TO PUMP FOR
To insure maximum performance and pleasure from
SERVICE ON ALL
INSTALLATIONS
this product, please follow the instructions and
cautions.
19mm
(3/4)
List of Optional Components (not included):
• 5 Foot Apron*
• Safe-T-Heater 9075.120*
* see your American Standard Distributor
List of Required Components (not included):
• Drain 1583.470*
• Bath Filler*
* see your American Standard Distributor
List of Required Tools and Supplies:
Tools
• Level
• Tape Measure
• Pipe Wrench
• Slip Joint Pliers
• Screw Driver
• Standard
Woodworking Tools
• Personal Safety
Equipment
• Caulking Gun
Supplies
• Nails
• Putty
• Caulking (waterproof)
• 1 x 3 or 2 x 2
• Drop Cloth
• 15 or 20 amp GFCI
• Cement, Plaster,
© American Standard Inc. 2004
All product names listed herein are trademarks
of American Standard Inc. unless otherwise noted.
Stringers
Outlet
Grout