Table of Contents
Advertisement
Pause function
Activating the pause function
Tap the
symbol. The selected heat setting flashes on the
I
hotplate indicator. Heating is interrupted.
Automatic time limit
If a hotplate is in use for a long time without the setting being
changed, the automatic time limit is activated.
The hotplate stops heating.
Switch the hotplate off.
Timer
The timer can be used in two different ways:
To switch a hotplate off automatically
■
As a kitchen timer
■
Automatic hotplate switch-off
Enter a cooking time for the relevant hotplate. When the
cooking time has elapsed, the hotplate switches off
automatically.
Setting the cooking time:
Set the heat setting.
1.
Touch the
symbol repeatedly until the indicator light for
§
2.
the desired hotplate begins to flash.
display.
Touch the + or - symbol. The default value appears.
3.
+ symbol: 30 minutes
- symbol: 10 minutes
Touch the + or - symbol until the desired cooking time
4.
appears on the timer display.
The cooking time flashes for a few seconds and then starts
counting down. If you have set a cooking time for several
hotplates, the shortest cooking time will be displayed. The
indicator lamps for the hotplates are lit.
When the cooking time has elapsed
When the cooking time has elapsed, the hotplate switches off.
flashes in the hotplate indicator. A signal sounds for 10
‹
seconds.
flashes in the timer display and the indicator lamp
‹‹
flashes. Turn off the hotplate control.
Changing the cooking time
Touch the
symbol repeatedly until the desired hotplate
§
indicator begins to flash. Use the + or - symbol to change the
cooking time.
8
flashes in the hotplate indicator.
‹
flashes in the timer
‹‹
Continuing cooking
Tap the
symbol again within 3 minutes. The hotplates
I
continue to heat.
Pause time exceeded
After 3 minutes, a
flashes in the display. Switch the hotplate
‹
off and make your settings again.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
Note: You can switch the hotplate back on again at any time.
Clearing the cooking time
Touch the
symbol repeatedly until the desired hotplate
§
indicator begins to flash. Touch the + and - symbol
simultaneously.
flashes in the timer display.
‹‹
Notes
If you wish to call up the cooking time for a hotplate, touch
■
the
symbol repeatedly until the desired hotplate indicator
§
lights up. The cooking time is displayed for 5 seconds.
You can set a cooking time of up to 99 minutes.
■
The automatic time limit also applies to the timer function.
■
You can use the pause function even if you have set a
■
cooking time.
The timer function is no longer active if there is a power cut.
■
Kitchen timer
You can use the kitchen timer to set a time of up to 99 minutes.
It runs independently of all the other settings.
To set the kitchen timer:
Touch the
symbol repeatedly until the indicator light for the
§
1.
kitchen timer flashes.
‹‹
Touch the + or - symbol. The default value appears.
2.
+ symbol: 10 minutes
- symbol: 5 minutes
Touch the + or - symbol until the desired cooking time
3.
appears on the timer display.
The cooking time flashes for a few seconds and then starts
counting down. The shortest time set using the timer counts
down on the display.
When the cooking time has elapsed
A signal sounds once the time has elapsed.
timer display and the indicator lamp for the kitchen timer
flashes. You can stop the signal ahead of time by touching the
symbol.
§
Changing the time
Touch the
symbol repeatedly until the display for the kitchen
§
timer flashes. Make your new settings.
flashes in the timer display.
flashes in the
‹‹
Advertisement
Table of Contents
