MANUFACTURED IN ITALY TEL.+39.0571.675005 FAX.+39.0571.675013 Stibbert mkII Italian Prestige CD Player Table Of Contents Congratulations & Introduction - Contents of Packaging - Construction Features - Set-Up Instructions - Positioning – Operating Conditions Remote Control Function Repeat Mode Through Remote Control Technical Specifications Warranty, Customer Service &...
OFC OCC Hyper Litz copper and are completely shielded with a steel sock inside. The Digital applications used are the most exotic and expensive available on the market and most of them are only used on Bluenote - Bluenote®...
INSTRUCTIONS AND WARRANTY CERTIFICATE. Construction features This section describes the special features of the STIBBERT TUBE MKII CD Player , the construction features, the reasons for the technical choices and the originality of the design. The STIBBERT TUBE MKII is a floating on Harmonic Iron springs CD Player that uses a board made in black high-density polished acrylic obtained via “polymeric melting”, as a main electronic cabinet support and a clear acryl ic plinth as the board supports the whole structure ..
Connect the Interconnect cables to your amplifier following the right channels (or the digital 75ohm cable having an external DAC). Place the STIBBERT Tube mkII on a level surface you have chosen for it. We recommend a wall shelf, as they are the most sturdy, and immune to footfall, but a well made equipment rack should give satisfactory results also.
Cause of it’s Thermoionic Valve output stage the Stibbert Tube must turned ON 30 seconds before the amplifier where it is connected. For the same reason it must turned OFF 30 seconds after the amplifier where it is connected. The Stibbert Tube having a Thermoionic Valve output stage can’t be quite as a Solid State one.
Bluenote CD Players Repeat Mode Instruction Once the unit is been turned ON to access the REPEAT mode is simple, anyway the Bluenote CD Players all have pre-installed a sophisticated repeat program software in order to be used in a future also in an OSD (On Screen Display) configuration.
Technical Specifications The following data describe the basic technical specifications of the Stibbert CD player at the time of drafting this manual. The specifications are subject to modification without notice. The product complies with the requirements laid down in the EC regulations.
Warranty Certificate The warranty certificate is enclosed separately and to be valid must be completed fill and returned to Bluenote factory or the official distribution. In all countries where there is an official distribution network, the dealer must stamp the warranty certificate. In compliance with the laws in force, the dealer may modify the official Bluenote warranty certificate wholly or partially without notice and without further mention being made in this instruction manual.
Do not return any object directly to the factory or to the national distributor or without being authorized to do so. In such cases both BLUENOTE® and the distribution agents operating within your territory decline responsibility of any kind. PS. The photos reproduced here refer to the Stibbert CD Player, but parts and descriptions may vary from the product on sale without notice.
6 meters (20 ft.) the CD Player SPEAKER HUMMING The speakers hum when Be sure in your home AC PROBLEMS Player system the ground is well connected connected to the system Troubleshooting Stibbert Italian Prestige CD Player F.A.Q. Adjustment STIBBERT CD Player...
Page 12
ACTION DESCRIPTION HOW TO ADJUST IT LEVELLING THE CD PLAYER The CD Player is not levelled With a spirit level take care of levelling the Upper Black acrylic board on its vertical and horizontal lines. With the help of a spirit level adjust the height of the black board through the spring supports rotation helped by their bolt shaped heads.
Need help?
Do you have a question about the STIBBERT and is the answer not in the manual?
Questions and answers