Page 1
Blue Sky International 70 Sea Lane Farmingdale, NY 11735 www.abluesky.com Blue Sky | SUB 15 Universal 1000-Watt subwoofer with adaptive x-over Owner’s Manual Version 1.9R | January 18, 2005...
Safety Instructions READ INSTRUCTIONS - Read all safety and operating instructions OVERLOADING - Do not overload wall outlets or extension cords before operating this product. as this can result in a risk of fire or electric shock. RETAIN INSTRUCTIONS - Retain these safety and operating LIQUID ENTRY - Never spill any liquid of any kind on the product.
� � � � � � � � � � � � � � � The PHASE setting on the SUB 15 Universal should typically be set to 0, It is now time to set the Variable Cutoff Frequency on the back of �...
System Signal Connections CABLE WIRING SPECIFICATIONS Most users of the SUB 15 Universal will be using ready made cables, however if you need to wire your own cables, follow the wiring specifications below. �� ��� XLR INPUTS (ELECTRONICALLY BALANCED) Figure 2: The SUB 15 Universal’s XLR inputs can handle up to +24dBu of signal level at the input and are compatible with most, if not all professional gear.
� � � � � � � � � � � � � � � The PHASE setting on the SUB 15 Universal should typically be set to 0, output and repeat for the right channel. Once calibrated do not �...
A Tour of the SUB 15 Universal Amplifier and I/O �� � �� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �...
Page 9
Blue get proper summation between SAT and SUB. The only way to be Sky monitors. If you are using the SUB 15 Universal with the SAT 5, absolutely sure which setting is appropriate for your studio is to use you will also need to set the 80Hz High Pass Filter on the SAT 5 so an acoustic analyzer.
similar to when the positions were reversed. If it is, then leave the Subwoofer Placement subwoofer in that location. If not, continue to experiment with the subwoofer location until the most accurate and best response has been achieved. Guide Method 2 Subwoofer placement using a real time analyzer –...
* Adjustable gain control * Voltage Sensitivity 100mv=90dB SPL@1m In order to continually improve all of its products Blue Sky reserves the right Switchable low frequency response characteristic: to change these specifications without notice.
12. General Contact Instructions Details Service for the U.S. versions of Blue Sky products is available only from our For sales and other enquiries, please contact Blue Sky at: authorized distributor, Group One Ltd., located in Farmingdale, New York. (Service for Blue Sky products outside the United States can be obtained...
Page 16
Blue Sky International 70 Sea Lane Farmingdale, NY 11735 www.abluesky.com...