Page 1
LED OPERATOR LED OPERATOR COLOR PRESETS CHASES PAGE 1 PAGE 2 PAGE GREEN BLUE MASTER RECORD BLACKOUT SPEED FADE 0.1S 10Min STROBE TAP SYNC User Instructions Rev1.0...
Functions: -3 Channel, RGB LED Controller -16 Color Presets -8 Preset Chases -Strobe Function -Individual RGB Channel Faders -Grand Master Fader -Speed & Fade faders for Chase control -Record Function to Record Colors and Chases -Power failure memory Technical Specifications: Power Input.........................DC 9V, 200mA Min DMX Out.......................3-pin female XLR connector Dimension....................9.64”x7”x2.36”...
Press the "BLACKOUT" button once to disengage. The LED indicator should be OFF. (3) After the first use, LED Operator will default to its last state before being shut off. Color Preset and Chase Playback 1. Adjust the Red, Green, Blue & Master faders to set a scene on the fly as desired.
Page 4
Adjust the “SPEED” “FADE” faders to manually set a desired chase speed and fade percentage. You can also press the “TAP SYNC” button twice continually to set a desired chase speed. The TAP SYNC LED will flash at the rate that it was pressed.. SPEED FADE 0.1S...
Page 5
Record Custom Chases Up to 8 chases can be programed, each of which can store up to 20 scenes/steps. Note: When recording custom chases, relevant factory chases will be erased. (1) Engage Record mode as described on page 3. (2) Press the CHASE # button (1-8) that you want to record to.
Strobe Function The strobe function will mix with a running Color Preset or Chase. Pressing the Strobe button will temporarily incorporate a strobe effect over a running color preset or chase. (1) Press the "STROBE" button when effect is desired. SPEED 0.1S (2) At any time, you can adjust the Strobe flash rate by pressing and...