DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or YOUR VEHICLE. the nearest Alpine Service Center for repairing.
Maintenance If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing. Installation Location Make sure the TUE-T150DV will not be exposed to: •...
Controls on remote control Back button Press the button return to the previously selected service. Power button Press the button to turn the DVB-T tuner unit on/off. 10 TXT button Press the button to enter the Teletext menu. 11 Exit button Press the button to return from a menu.
Getting Started Settings in the main menu • Press MENU key on the remote control to view the main menu on the screen. • Press EXIT to quit. Entering sub-menus • Select highlighted item and press OK to enter the sub-menu. The sub-menu will be shown on the screen.
Installation • The installation menu lets you add, delete and auto scan terrestrial carriers. • Auto Scan In this menu you can select your country and scan mode to do a fast or slow scan. • Fast scan scans a list of carriers. •...
Page 7
Installation • Carrier Info In this menu you can see the carrier parameters. Press OK to re-tune the highlighted carrier. • Delete Carrier Select a carrier and press OK to delete it. • Delete All Carriers This function deletes all stored carrier information and services.
STB Setup • From the STB Setup menu you can reach the following sub-menus: - TV Setting - Password Setting - Factory Default - Time Setting - Parental Guidance - Box Setting • TV Setting - Language: Select your preferred OSD language. -TV Screen options: a.
Page 9
STB Setup • Password Setting In this menu you can change your password. The new password will be automatically stored after the matching confirmation entry is done. • The default password is 0000. • Factory Default Select Factory Default and confirm with Yes to proceed the download of the device’s factory default settings.
Page 10
- Select “Fix” to fix the current volume output level and block adjustment by remote control. • Analog RCU - Extended RC Support: Select “Disabled” to support all standard RC commands for TUE-T150DV. Select “Enabled” to activate the extended command support for analog TV RC commands. 12-EN...
Viewer’s Preference Icons: • Viewer’s Preference - MOVE: Select this function to move any channel to any position within the channel list. - SWAP: Select this function to swap the position of two choosen channels. Mark desired services as favourite to access them by using the FAV+ (yellow) and FAV- (blue) buttons.
Hotkeys • Electronic Program Guide (EPG) EPG provides information about the current program (Now), the following (Next) and the weekly (Weekly) broadcasts. (Only available, if supported by the broadcaster.) • Press the EPG button on the remote control. • Press the “1” button to show “Now” information. Press up/down key to view more programs.
Page 13
Hotkeys • Channel List Press the LIST button on the remote control. All available channel numbers and station names are displayed. Press the up/down buttons to scroll. • Icon Description: Indicates a service that has been selected as favourite. Icons: Indicates an encrypted (pay) service.
Page 14
Hotkeys • Press the TXT key to view Teletext, Teletext subtitle or DVB-subtitle. This information is sent by the broadcaster and is not permanently provided. In Teletext mode the following controls are available: - up/down buttons: Load the next/previous page. - left/right buttons: Skip the next/previous 100 pages.
Page 15
Hotkeys • Automatic Search Function The automatic search function will only search for alternative frequencies of the service that was received before reception was lost. If the reception is lost the TUE-T10DV will automati- • Press the TXT key to view Teletext, cally carry out a quick search of all known service Teletext subtitle or DVB-subtitle.
OSD Structure Channel View Viewer’s Preference Status Add Carrier Carrier Information Installation Delete Carrier Delete All Carriers Auto Scan Main Menu TV Settings Password Setting STB Setup Factory Default Time Settings Parental Guidance Box Setting Signal Strength About Box 18-EN 1-EN...
Installation and Connections Before installing or connecting the unit, please Caution read the following and pages 2 and 3 of this manual thoroughly for proper use. HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. Warning The wiring and installation of this unit requires special technical skill and experience.
OR EXTREME HEAT (such as the engine provide power for this unit. When connecting the compartment). TUE-T150DV to the fuse box, make sure the fuse for the intended circuit of the TUE-T150DV has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle.
EEPROM -Selecting the video output format (factory default is PAL): Switched power lead (Ignition) (red) 1. Turn TUE-T150DV on Connect to an accessory terminal in the fuse block. 2. Set both DIP switches to down position 3. Select the video system by pressing the RESET button...
California 90501, U.S.A. Tokyo 141-0031, Japan Phone 1-800-ALPINE-1 (1-800-257-4631) Phone 03-5496-8231 ALPINE ELECTRONICS OF CANADA, INC. ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 7300 Warden Ave., Suite 203, Markham, 161-165 Princes Highway, Hallam Ontario L3R 9Z6, Canada Victoria 3803, Australia Phone 1-800-ALPINE-1 (1-800-257-4631)