Da100 Distribution Amplifier - CAD Audio WX100 Series Installation Manual

DA100 Distribution Amplifier

The DA100 is an antenna distribution amplifier for the CAD Audio WX100 wireless receiver.
The DA100 is designed for use in pro audio applications such as audio-video integration and
musical/theatrical performance.
The DA100 features a net 0dB amplification eliminating split-attenuation when used in
conjunction with the WX100 receiver. Minimal amplification is applied to reduce the risk of
unwanted intermodulation interference.
The onboard power distribution system conveniently distributes 12V power for up to four of
the WX100 receivers. The power switch on the DA100 also controls the WX100 receiver power
when connected to the power distribution hub.
All antenna connectors are BNC-type for easy plug and play compatibility.
Antennas are not supplied with the DA100. Whip antennas supplied with the WX100 may be
used and can be front mounted utilizing the ANT105 mounting kit. Additional high-performance
antenna options are available from CAD Audio.
The DA100 comes complete with RF patch cables for four receivers, rack ears and the
appropriate power cables for patching and connecting an AC power source.
Specifications DA100 Distribution Amplifier
Frequency Range................................................UHF.600.-.900MHz
Impedance. . .................................................................................50Ω
Gain. . ............................................................................... 0dB.+/-.3dB
AC Power.................................................................100.-.240V,.60Hz
DC Output..............................................................DC.12.-.15V,.3.6A
Dimensions...............................16 -1/2".[41.9cm].x.7-13/16".[19.8cm]
.
Net weight [mass]................................................. .3lbs.7oz.[1.56kg]
8
x.1- 3/4".[4.45cm]