Rosewill RCBR-13020 User Manual

RCBR-13020 Power Pack 11200mAh
This product is designed to charge electronic devices with DC5V USB input
RCBR-13020 Power Pack 11200mAh

Box Content

Power Pack x1
Micro-USB Charging Cable x1
User Manual x1

Product Overview

Micro-USB Input Port 

2A USB Output Port




LED Flashlight

 1A USB Output Port

 LED Indicator

Power Button
RCBR-13020 Power Pack 11200mAh
LED Flashlight
To use the LED flashlight, press the power button two times in quick succession to turn on. Repeat the
action to turn off. The light can run continuously for up to 480 hours on a full charge.

Power Indicator

Press the power button once to check the four LED status lights to show how much charge is left.
Power indicator One light on Two lights on
Battery Charge
25% 25—50%
Left
RCBR-13020 Power Pack 11200mAh

Recharge Power Pack

1. Connect the included USB charging cable to a power supply such as an AC adapter, USB wall charger,
or a computer USB port.
2. Connect the other end to the Power Pack's micro-USB input to recharge.
AC: Power Adapter
110V~220V
RCBR-13020 Power Pack 11200mAh

Charging Other Devices

1. Connect the Power Pack's output port to your device's charging port with a USB cable.
2. Press the power button to start charging.
3. 60 seconds after fully charged or disconnecting your charging device, the Power Pack will
automatically enter power savings mode and shut off power to the output port.
The Power pack has two USB output ports capable of charging two devices simultaneously.
1A output port is designed for mobile phones and MP4 or GPS devices. The 2A output port is designed
for tablet PCs or other devices requiring a higher charging current, such as an iPad. (please refer to your
device's manual for required charging current. Samsung Galaxy Tab needs another special charging
connector)
If an incompatible device is not charging after connecting to the Power Pack, there will be no damage to
your device. As long as your device charges through USB, either port can be used for charging so there is
no need to worry about using the wrong USB port.
If you charge through the 2A port, it will take less time to charge your device due to the higher amperage.
However, the battery efficiency will be lower. For example: if charging a certain device with the 1A port,
the Power Pack can fully charge it four times, and the charging time is about 120 minutes for each full
charge. If charging the same device via the 2A port, it can fully charge the device 3.5 times, but a full
charge would take roughly only 80 minutes.
User Manual
User Manual



User Manual
Three lights on Four lights on
50—75% 75—100%
User Manual
Computer USB port
User Manual
RCBR-13020 Power Pack 11200mAh
Charging Status Indicator
When charging Power Pack:
- The power indicators will light up in the relating positions showing the current charge status.
- If the power indicator lights are continuously on, the recharge is complete.
When charging other devices, press the power button:
- Power indicators will light up in the relating positions
showing available charge capacity.
- If the power indicator does not light up, the Power Pack is
out of power and needs to be recharged.
RCBR-13020 Power Pack 11200mAh

Technical Specification

Capacity 11200 mAh
Battery Lithium Ion Samsung Cell
Input Micro-USB 5V
Output1 / Output2 5V 2A / 5V 1A

Product Caring

- Keep Power Pack dry and away from damp and erosive environments.
- Do not disassemble.
- Do not store Power Pack in extreme temperature environments.
RCBR-13020 Power Pack 11200mAh

Troubleshooting

Power Pack not charging:
- Ensure Power Pack is properly connected to the power source. Check for loose connections.
- Check the USB charge cable. Is it still working?
- Ensure the power source is functioning. Try a different power source.
- If charging through a computer USB port, ensure the computer is powered on and active.
Devices are not charging:
- Press the power button to check LED Status indicator for available charge capacity.
- The power requirement of the device is not compatible with the Power Pack.
- Ensure the Power Pack is properly connected to the device. Check for loose connections.
- The charging cable may no longer be functioning. Please try using a different cable.
- If you accidentally connected the Power Pack's input port to the output port, the short circuit protection
will kick-in. To reset a short circuit-protection, please disconnect all cables and then connect the
Power Pack to a source to charge.
RCBR-13020 Power Pack 11200mAh
Thank you for purchasing a High-Quality Rosewill Product.
Please register your product at :http://www.rosewill.com
for complete warranty information and future support for your product.
If you have any questions while using our product, please feel free to contact us.
Support Phone Number: 800-575-9885
Support Email: techsupport@rosewill.com
Visit our website: www.rosewill.com
www.rosewill.com
User Manual
User Manual
Weight 9.10 oz
Dimension 3.07 x 4.17 x 0.91 inch
Input Charging Time approx. 8 hours*
Battery Life >500 cycles
*Depending on power source charging current
User Manual
User Manual