Page 2
This guide explains how to use the Command-Line Interface (CLI) to configure the Switch. • Web Configurator Online Help Click the help icon in any web configurator screen for help in configuring that screen and supplementary information. RM410 Hardware Installion Guide...
Use a #2 Philips screwdriver to install the M4 screws through the mounting bracket holes into the Switch. Repeat step 2 to install the second front mounting bracket on the other side of the front of the Switch. RM410 Hardware Installion Guide...
You may now mount the Switch on a rack. Proceed to the next section. 1.3 Mounting the Switch on a Rack Use the rack screws (larger than the M4 screws) to mount the Switch with brackets on the rack. RM410 Hardware Installion Guide...
Page 5
Use a screwdriver to install the rack screws through the mounting bracket holes into the rack. Repeat steps 1 and 2 to attach the other rear mounting bracket on the other side of the rack. Rear Front RM410 Hardware Installion Guide...