ZyXEL Communications RM410 Installation Manual
ZyXEL Communications RM410 Installation Manual

ZyXEL Communications RM410 Installation Manual

Rack mounting kit

Advertisement

RM410
Rack Mounting Kit
Version 1.00
Edition 1, 12/2012
Quick Start Guide
Hardware Installation Guide
www.zyxel.com
Copyright © 2012 ZyXEL Communications Corporation

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RM410 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ZyXEL Communications RM410

  • Page 1 RM410 Rack Mounting Kit Version 1.00 Edition 1, 12/2012 Quick Start Guide Hardware Installation Guide www.zyxel.com Copyright © 2012 ZyXEL Communications Corporation...
  • Page 2 This guide explains how to use the Command-Line Interface (CLI) to configure the Switch. • Web Configurator Online Help Click the help icon in any web configurator screen for help in configuring that screen and supplementary information. RM410 Hardware Installion Guide...
  • Page 3: Installation Requirements

    Use a #2 Philips screwdriver to install the M4 screws through the mounting bracket holes into the Switch. Repeat step 2 to install the second front mounting bracket on the other side of the front of the Switch. RM410 Hardware Installion Guide...
  • Page 4 You may now mount the Switch on a rack. Proceed to the next section. 1.3 Mounting the Switch on a Rack Use the rack screws (larger than the M4 screws) to mount the Switch with brackets on the rack. RM410 Hardware Installion Guide...
  • Page 5 Use a screwdriver to install the rack screws through the mounting bracket holes into the rack. Repeat steps 1 and 2 to attach the other rear mounting bracket on the other side of the rack. Rear Front RM410 Hardware Installion Guide...

This manual is also suitable for:

Xs3900 series

Table of Contents