Troubleshooting - Gigabyte Touch Note M1028 User Manual

5.1 Troubleshooting

•••••••••••••••••••••••
Warning: Under the condition that you can't handle
trouble, please refer to your dealer to get professional
service.
AC Adapter
Trouble
30 30
Make sure the AC adapter is well connected
to the power source and T1028(M1028) Touch
No power supplies
Note.
to T1028(M1028)
Check the cable and plug to make sure they
Touch Note
are OK. If they are broken, please contact your
local dealer ASAP.
Battery pack
Trouble
No power supplies The remaining power in battery pack may be
to T1028(M1028) not enough to power on the machine. Connect
Touch Note AC Adapter to recharge it.
Solution
Solution
Check temperature of battery pack's surface.
Battery pack can't be recharged if its tempera-
ture is too high or too low. Recharged it after
its temperature is the same with the normal
environment one.
Can't be recharged
after connecting If battery pack is fully discharged, it won't be
AC Adapter recharged at once. Please wait for some min-
utes.
If the power indicators of battery pack are
always not lit up, its life may be over. Please
contact your dealer to buy another one.
Battery life depends on using condition of
T1028(M1028) Touch Note. You can change
the settings in Power Manager of OS to save
power.
Battery pack can't exert its full capacity if it
Battery life is not
works when not fully recharged frequently.
as long as it should
Power T1028(M1028) Touch Note by battery
be
pack until its power drops to a critically low
level and the machine emits a high-pitched
beep or displays a warning message; after that,
recharge battery pack to make battery pack
work longer.