CONTENTS ------------------------------------------------------------------------------------------------ SETUP AND SAFETY GPF 6885 Special features Packing contents OVERVIEW The front of the digital picture frame The rear of the digital picture frame The remote control CONNECTION AND PREPARATION Setting up the digital picture frame Removing the protective foil...
Page 3
CONTENTS ------------------------------------------------------------------------------------------------ FILE BROWSER General information Opening the file browser File browser functions File browser external storage media PREFERENCES Setting the switch-on timer Setting the switch-off timer Setting the alarm Restoring the digital picture frame to the default settings OPERATING WITH A COMPUTER System requirements MP3 data transfers INFORMATION...
SETUP AND SAFETY -------------------------------------------------------------- This device is intended for the reproduction of video and audio signals. Any other use is expressly prohibited. The device is designed for use in dry rooms. If you do use it outdoors, make sure it is protected from moisture such as dripping or splashing water.
Provided they are within the thresholds specified by the DIN norm, pixel faults of this kind cannot be regarded as a defect as defined by the warranty. Packing contents GPF 6885 digital picture frame Stand CR 2025 remote control with 1 lithium battery in the compartment...
OVERVIEW ---------------------------------------------------------------------------------------------- The front of the digital picture frame Screen 8” TFT 4:3 screen with a transparent protective foil for transport. Infrared sensor for remote control signals. Stand Detachable stand...
OVERVIEW ---------------------------------------------------------------------------------------------- The rear of the digital picture frame ON/OFF Switches the digital picture frame on and off. In the menus: move the cursor up or down. In repeat mode: select files or tracks forward or reverse. Press and hold down to increase or decrease the volume. In the menus: move the cursor to the left or right.
Page 8
OVERVIEW ---------------------------------------------------------------------------------------------- The left side of the rear panel Slot for a CF memory card. SD/MMC/ Slot for memory cards for SD, SDHC, MMC and MS formats. The right side of the rear panel Socket for the mains cable. USB port for connecting the digital picture frame to the computer with the USB cable supplied.
OVERVIEW ---------------------------------------------------------------------------------------------- The remote control Switches the digital picture frame to and from standby mode. SETUP Opens the »Setup« menu. In the menus: moves the cursor up. In playback mode: selects the next file or the next track. In zoom mode: moves the picture section up. In the menus: moves the cursor down.
Page 10
OVERVIEW ---------------------------------------------------------------------------------------------- In the music playback mode: starts the fast forward search at various speeds. In picture playback mode: selects the next picture. In the menus: switches one menu level back. Zooms in on scenes during picture playback. Switches the picture format between 4:3 and 16:9 16:9 (for 16:9 photos with a resolution of >...
CONNECTION AND PREPARATION ---- Setting up the digital picture frame Place the base of the digital picture frame in the centre of the stand supplied. Note: Make sure the catch on the stand latches into place in the recess on the base of the digital picture frame position the digital picture frame vertically in the stand supplied.
CONNECTION AND PREPARATION ---- Activating the remote control battery When using it for the first time, activate the remote control battery by pulling out the film protruding from the battery holder. Changing the battery Pull out the battery holder. When inserting the battery (3 V, lithium), make sure the positive terminal (+) of the battery and the (+) sign on the holder are on the same side.
CONNECTION AND PREPARATION ---- Connecting or inserting data media Note: Before inserting or connecting a memory card or USB memory stick, switch off the digital picture frame with »ON/OFF«. Switch the digital picture frame on again once you have con- nected it up.
CONNECTION AND PREPARATION ---- Connecting a USB memory stick HOST« port on the digital Connect the USB stick into the »USB picture frame. Connecting an MP3 player Connect the USB port of the MP3 player to the »USB« socket on the digital picture frame using a standard USB cable.
CONNECTION AND PREPARATION ---- Disconnecting from the computer If there is no data transfer in progress, you can disconnect the digital picture frame from the computer. You must first remove the digital picture frame from the Windows desktop by following the Windows instructions for “Removing hard- ware”.
INITIAL SETUP ---------------------------------------------------------------------------------- Switching on the digital picture frame Press »ON/OFF« on the digital picture frame to switch it on. Selecting the language of the screen menu You can choose between various menu languages. The default setting is »Deutsch«. Press »SETUP« to open the »Setup« menu. Press »...
GENERAL FUNCTIONS ---------------------------------------------------- Switching on and off Press »ON/OFF« on the digital picture frame to switch it on. – Display: »Loading ...«; then the main menu appears. Press » « on the remote control to switch the digital picture frame to standby.
GENERAL FUNCTIONS ---------------------------------------------------- Selecting the operating modes Press »MENU« to open the main menu. Select the »Nand« option by pressing » « or » « and activate with »OK«. Select the operating mode by pressing » « or » « and confirm with »OK«: –...
GENERAL FUNCTIONS ---------------------------------------------------- The calendar option If you select »Calendar«, the current month with the current date and time appear. At the same time, a slide show runs with inset pictures. The date and the time must be correctly set for the calendar to function.
PICTURE PLAYBACK -------------------------------------------------------------- Basic picture playback functions Starting picture playback Press »MENU« to open the main menu. Select the »Nand« option by pressing » « or » « and activate with »OK«. Select the »Photo« mode by pressing » « or » «...
Page 21
PICTURE PLAYBACK -------------------------------------------------------------- Enlarging pictures (zooming) This function enables you to enlarge individual pictures and move pictures sections on the screen. You can enlarge the picture in four steps (x2, x4, x8 and x16). Press » « repeatedly to enlarge pictures. Press »...
Page 22
PICTURE PLAYBACK -------------------------------------------------------------- Opening the slide show with background music You can open the slide show with background music directly from any operating mode. Press » « to open the slide show directly. – Background music playback starts with the first track of the first folder.
PICTURE PLAYBACK -------------------------------------------------------------- Picture playback menu functions Setting the delay for automatic picture playback You can set the time delay of one picture to the next for the slide show. Press »SETUP« to open the »Setup« menu. Press » « or » «...
MUSIC PLAYBACK -------------------------------------------------------------------- Basic music playback functions Starting music playback Press »MENU« to open the main menu. Select the »Nand« option by pressing » « or » « and activate with »OK«. Select the »Music« mode by pressing » « or » «...
MUSIC PLAYBACK -------------------------------------------------------------------- Fast forward and reverse search To search for a particular passage in a track, press » « or » « during playback. – The fast forward or reverse search begins with the »x2« speed setting. To increase the speed (x4, x8), press » «...
FILE BROWSER -------------------------------------------------------------------------------- General information If no external data medium is connected or being used, the file browser shows the content of the internal memory. This is the data which you have prepared and sorted on the computer ready for transferring to the digital picture frame.
Page 27
FILE BROWSER -------------------------------------------------------------------------------- Copying files You can copy files, provided an external storage medium is being used or connected. Select the file with » « or » «. Mark the file by pressing » «. – Display: » «. Select other files by pressing » «...
FILE BROWSER -------------------------------------------------------------------------------- File browser external storage media If an external data medium is connected or being used, another op- tion appears in the main menu for the external memory: »SD/MMC« (memory card) or »USB« (removable storage medium). Open the file browser using this option.
PREFERENCES ------------------------------------------------------------------------------------ Setting the switch-on timer The switch-on timer can only be activated once the digital picture frame has been switched to standby with » « on the remote control. If the digital picture frame is switched off with »ON/OFF« on the device, then the switch-on timer will not work.
PREFERENCES ------------------------------------------------------------------------------------ Setting the switch-off timer The switch-off timer automatically switches the digital picture frame to standby. Then the digital picture frame can be switched on again by pressing » « on the remote control. The correct settings for the date and time must be made before the switch-off...
PREFERENCES ------------------------------------------------------------------------------------ Setting the alarm If the alarm is set, it will also function in standby mode. The alarm emits an acoustic signal at the set time. The correct settings for the date and time must be made before the alarm can work. Press »SETUP«...
OPERATING WITH A COMPUTER -------------- System requirements When connected to a computer, the digital picture frame appears as a removable disk drive. This corresponds to the digital picture frame’s flash memory. Your computer should meet the following require- ments: – Windows 2000 / ME / XP / Vista, Mac OS 10 or higher, Linux Kernel 2.6 –...
INFORMATION ------------------------------------------------------------------------------ Technical data This device is noise-suppressed according to the applicable EU directives. This product fulfils the European directives 2006/95/EC and 2004/ 108/EC. This device conforms to the safety regulation DIN EN 60065 (VDE 0860) and therefore the international safety regulation IEC 60065. The type plate is located on the back of the digital picture frame.