Audi S5 Owner's Manual page 138

document_0900452a81793dcc.book Seite 136 Mittwoch, 21. März 2007 5:42 17
136 Audi parking system
WARNING
Please note that objects which are not touching the ground may
appear to be further away than they actually are (e.g. the bumper
of a parked vehicle, a towing bracket or the rear end of a truck). In
this case you should not use the orientation lines for judging the
distance (accident risk).
Applies to vehicles: with parking system advanced
Parking mode 1
"Parking mode 1" can, for example, be used to assist you
when parking in a garage or carport.
– Activate the reversing camera ⇒ page 131.
"Parking mode 1" ⇒ fig. 149 is the standard setting.
Dynamic orange-coloured orientation lines
blue area markings
of the reversing camera.
– When the vehicle is stationary, use the orange orienta-
tion lines as a guide for turning the steering to the
correct angle for the parking space.
– Reverse into the space and adapt the steering angle to
the parking space, using the orange lines to assist you
⇒
.
– Align your vehicle according to the blue area marking.
The blue area marking should be parallel to the lines of
the parking space ⇒ fig. 150.
A
Blue area marking
1
The marking behind the vehicle (in different shades of blue) is an
extension of the vehicle outline. It reaches about five metres to the
rear of the vehicle. The shade of blue changes at a distance of
Fig. 149 MMI display:
approx. 1 m, 2 m and 5 m from the vehicle.
Driving into the
parking space with the
A A
and Orange orientation lines
correct steering angle
2 3
The orientation lines change direction according to the steering
angle. These lines represent the path which the rear of the vehicle
would take if you were to reverse using the current steering angle.
The dynamic orientation lines also have additional markers
which are spaced approx. 1 metre apart. These markers help you to
judge the distance up to an obstacle.
A
Red line
4
Fig. 150 MMI display:
Aligning the vehicle The distance from your rear bumper
with the help of the 40 cm ⇒
. From here at the latest, the driver should not reverse
blue area markings
any further ⇒ page 142.
A
and static
3
A
will be projected onto the image
1
A
2
A
to the red line is approx.
5