Clean Boot - GLOFIISH X800 User Manual

PDF created with pdfFactory Pro trial version
| Cold boot method: Hold the
"Power Button" of the Pocket
PC with one hand while holding
the stylus tip to push in the
"Reset Button" with the other.
Simultaneously release both the
"Power Button" and "Reset
Button".
| Appropriate situation: If a previous reset has already been attempted and
the Pocket PC is still unable to maintain normal operations, has no
response, or if the screen is frozen.
| Before executing the preceding "Cold boot method", please carefully
consider the following instructions and then decide on the cold boot
method.
1. After a cold boot is performed, if no buttons are pressed, when Pocket PC
automatically completes the system startup process, the last display will be
the Today screen. This is identical to the reset result.
2. If a previous reset has already been attempted but the Pocket PC is still
unable to maintain normal operation, consider the following solution:
After cold boot, hold the End Button
PC until the system inquiry screen is shown, and then release the End
Button. Next, please read thoroughly through the instructions on cold
booting before continuing carefully.
1-14

Clean Boot

on the bottom right of Pocket
www.pdffactory.com