Troubleshooting - TakeMS Blade User Manual

Troubleshooting

Problem
The LCD displays
nothing when the
device is started.
No sound when
playing an audio
file.
The player
cannot be
connected to
the PC.
The displayed
time is changing
constantly.
The PC has error
when you plug
and unplug the
player.
Total memory
displayed on the
player is not in
accordance with
the marked
amount.
Some of MP3 files
cannot be
played properly.
Page 20
Possible Cause
Battery is too low.
The volume is too low.
Bad audio file.
The USB interface is not
supported by PC's
motherboard.
The bit rate of the MP3 file is
changing during playback.
The player is disconnected
from the PC abruptly while
transferring files.
Part of memory is used to
store programs and display
characters.
The MP3 file is compressed
by a standard, such as
MPEG I Layer 1 or Layer 2
that the player does not
support.
English – 20 | MP-288
Solution
Charge the battery.
Adjust the volume.
Delete or skip the file.
Update or replace
the PC's mother-
board.
Try to use fixed bit
rate to compress the
MP3 file.
Do not disconnect
the player from the
PC when transferring
files.
1. Delete the unsup-
ported MP3 files.
2. Use MPEG I Layer 3
standard to com-
press the unsup-
ported MP3 files.