Page 1
N197 THANK YOU FOR BUYING A RYOBI DETAIL SANDER Your new detail sander has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation and operator safety. Properly cared for, it will give you years of rugged, trouble free performance.
RULES FOR SAFE OPERATION The purpose of safety rules is to attract your attention to 9. DRESS PROPERLY. Do not wear loose clothing or jewellery. They can be caught in moving parts. Rubber possible dangers.The safety symbols and the explanations with gloves and non-skid footwear are recommended when them, require your careful attention and understanding.
Page 3
FEATURES 1. On / Off Slide Switch 4. Dust Port 2. Air Vents 5. Sanding Sheet 3. Sanding Pad Page 2...
APPLICATIONS OPERATION You may use the sander for the purposes listed below: CAUTION: Sanding on wood surfaces. Keep the cord away from the sanding pad and position the Removing rust from and sanding steel surfaces. cord so that it will not be caught on timber, tools or other Polishing and scrubbing porcelain and metal.
Page 5
OPERATION 2. Place the sander on the work piece so that all of the sanding pad surface is in contact with the work piece. CAUTION: To avoid damaging the motor from overheating, be careful not to let your hand cover the air vents. 3.
Page 6
RYOBI NEW ZEALAND PTY. LTD. AUCKLAND: 27 Clemow Drive, Mt Wellington, N.Z. Tel: (09) 573 0230 - Free Call: 0800 279 624 - Fax: (09) 573 0231 - www.ryobi.co.nz Contact during normal business hours. This Guarantee Form Should Be Retained By The Customer At All Times For your record and to assist in establishing date of purchase (necessary for in-guarantee service) please keep your purchase docket and this form completed with the following particulars.