Operations Playing A Cd; Programming A Cd - GPX BC219B User Manual

OPERATIONS
PLAYING A CD
Disc compatibility: CD, CD-R/RW
1. Adjust the Source Switch to CD/Aux
Mode.
2. Open the CD Door and load a CD into
the unit.
3. Press the Play/Pause Button to begin
playing the loaded CD.
AM
4. Press the Stop Button to stop the CD
during play.
5. Press the Skip/Search Buttons to skip
between tracks on the loaded CD.
Press and hold the Skip/Search
Buttons to search through individual
tracks on a loaded CD.
6. Press the Repeat Button once to repeat
the current CD track.
Press the Repeat Button twice to repeat
an entire album.
Please note: When an audio source is
connected to the Auxiliary Input and
a CD is loaded, the Auxiliary Input
connection will take priority. To play a
CD, disconnect the Auxiliary Input.
6

PROGRAMMING A CD

Before Programming a CD, read through the
"Playing a CD" instructions.
1. After the CD is loaded and ready to
play, press the Program Button to
begin programming the CD's tracks.
2. Press the Skip/Search Buttons to select
the track to play first.
Press the Program Button to program
3.
the selected track.
4. Repeat steps 2-3 to continue
programming tracks numerically.
Up to 20 CD tracks can be programmed
at one time.
AM
5. Press the Repeat Button once to repeat
all of the programmed tracks.
Press the Repeat Button twice to
repeat an individual track from the
programmed list.
AM