Control Panel - Electrolux EUF2500AOW User Manual

www.electrolux.com
6

CONTROL PANEL

Temperature indicators
1
Action Freeze light
2
Alarm light
3
Alarm reset button /
4
Action Freeze button
ON/OFF /
5
Temperature set button
SWITCHING ON
Insert the plug into the wall socket.
If the Temperature indicator is not illumina-
ted, press ON/OFF button.
If the temperature inside the appliance is
too warm the Alarm light will flash and the
Alarm buzzer starts.
Press the Alarm reset button to switch off
the Alarm buzzer.
SWITCHING OFF
1. Press the ON/OFF button for few sec-
onds.
2. All Temperature indicators will light up
and then count down in 3 steps.
3. Disconnect the mains plug from the
mains socket to disengage the appli-
ance completely.
TEMPERATURE REGULATION
1. Press the Temperature set button.
The temperature indicator will flash.
1
5
2. Select a new temperature by pressing
the Temperature set button repeatedly.
3. The Temperature indicator will stop
flashing after a while.
The temperature indicator shows the set
temperature.
The set temperature will be reached within
24 hours.
Keep in mind that the temperature inside
the appliance also depends on:
• room temperature
• how often the door is opened
• quantity of food stored
• location of the appliance.
ACTION FREEZE FUNCTION
1. Press the Action Freeze button.
2. The Action Freeze light will light up.
This function stops automatically
after approx. 52 hours.
It is possible to deactivate the func-
tion at any time by pressing the Ac-
tion Freeze button.
The Action Freeze light will switch
off.
HIGH TEMPERATURE ALARM
Temperature increase in the freezer com-
partment (for example due to an earlier
power failure or door is open) is indicated
by:
• Alarm light flashing.
2 3
4