Powering The Unit - GPX KC218S Instruction Manual

Powering the Unit

1. To power the unit,
simply connect it to
an AC outlet using the
attached AC cord.
. The plastic extensions
on the back of the unit
provide a holder for
excess cord.
Battery Backup
Use 3 AAA Batteries to serve as a backup power source for the clock only. (Batteries
not included)
Changing the Remote Battery
1. Push the Release Button and pull out the Battery Compartment to access the
battery.
. Replace the old battery with an equivalent new battery (CR05).
3. The positive side of the battery, as indicated by a plus symbol, must be facing up
when inserted into the remote.
120V AC/ 60H
z
CR2025
OPEN
PUSH
5