Bosch BX3 Instructions For Use Manual page 10

Vacuuming
*
auto
*
10
Adjust the "autofloor" floor tool:
Hard floor setting
Fixed position for vacuuming hard/parquet floors
Automatic setting
The nozzle adjusts automatically to the floor covering
and switches from hard/parquet floors to carpeted
floors
Carpet setting
Fixed position for vacuuming rugs and carpets
If you are vacuuming varying types of floor
coverings (hard floors <-> carpets), we recommend
that you use the automatic setting so that the
nozzle adjusts automatically to the floor and you
do not need to switch over the nozzle setting.
To clean the "autofloor" nozzle, switch it to the hard
floor setting and simply vacuum it using the suction
pipe/telescopic tube.
* Depending on equipment
Remove the upholstery nozzle and crevice nozzle from
the accessories holder as illustrated.
=>
=> auto
=>