Table of Contents
Advertisement
Quick Links
TABLETOP PAPER SHREDDER
Model 93499
ASSEMBLY AND OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
®
Copyright 2005 by Harbor Freight Tools
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353.
Advertisement
Table of Contents
Related Manuals for Gordon 93499
Summary of Contents for Gordon 93499
- Page 1 TABLETOP PAPER SHREDDER Model 93499 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. ® TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com...
-
Page 2: Product Specifications
Keep bystanders, children, and visitors away while operating a Paper Shredder. Distractions can cause you to lose control. For technical questions, please call 1-800-444-3353. SKU 93499 PRODUCT SPECIFICATIONS 0.14” Wide 1 (#20WT.) 6 “AA”... -
Page 3: Electrical Safety
Stay alert. Watch what you are doing, and use common sense when oper- ating a Paper Shredder. Do not use a Paper Shredder while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating Paper Shredders may result in serious personal injury. - Page 4 Do not force the Paper Shredders. Allow the Shredder to work at its own speed. Do not use the Paper Shredder if the Power Switch does not turn it on or off. Any Paper Shredder that cannot be controlled with the Power Switch is dangerous and must be replaced.
-
Page 5: Specific Safety Rules
Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Paper Shredder. Do not force the Paper Shredder. This Paper Shredder has a two minute on, 15 minute off cycle. If it is not observed, it may overheat or blow the fuse. Also, observe the one sheet maximum. -
Page 6: Grounded Tools: Tools With Three Prong Plugs
Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the following illustration. (See Figure A.) FIGURE A For technical questions, please call 1-800-444-3353. SKU 93499 GROUNDING WARNING! Page 6... -
Page 7: Double Insulated Tools: Tools With Two Prong Plugs
If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Figure C.) For technical questions, please call 1-800-444-3353. SKU 93499 FIGURE B EXTENSION CORDS Page 7... - Page 8 5.1 - 7.0 7.1 - 12.0 12.1 - 16.0 16.1 - 20.0 FIGURE C For technical questions, please call 1-800-444-3353. SKU 93499 (120 VOLT) EXTENSION CORD LENGTH 50 FEET 75 FEET *Based on limiting the line voltage drop to five volts at 150% of the rated amperes.
- Page 9 Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. ASSEMBLY AND OPERATING INSTRUCTIONS CAUTION: Always make sure the Power Cord of the Paper Shredder is un- plugged from its electrical outlet prior to installation. For technical questions, please call 1-800-444-3353.
- Page 10 Caution: Do not put paper with paper clips, staples, or folds through the Paper Shredder. Doing so will damage the unit. Set the Paper Shredder into place and make sure it sits securely on the Waste Bin. Caution!! Make sure clothing or long hair stay clear of the unit.
-
Page 11: Inspection, Maintenance, And Cleaning
INSPECTION, MAINTENANCE, AND CLEANING WARNING! Make sure the Power Switch of the Paper Shredder is in its “OFF” position, that the batteries are removed, and that the unit is unplugged from its electrical outlet before performing any inspection, maintenance, or clean- ing procedures. -
Page 12: Troubleshooting
Set the switch to “REV” and remove excess paper (make sure not to go over the 1 sheet maximum). Unplug the unit and allow it to cool before restarting. For technical questions, please call 1-800-444-3353. SKU 93499 Troubleshooting Page 12...
Need help?
Do you have a question about the 93499 and is the answer not in the manual?
Questions and answers